D-Link DSL-2870b User Manual page 89

D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
Basic Rate: Select the basic wireless rate used here.
Fragmentation Threshold: Enter the fragmentation threshold value used here.
RTS Threshold: Enter the RTS threshold value used here.
DTIM Interval: Enter the DTIM Interval value used here.
Beacon Interval: Enter the beacon interval value used here.
Global Max Clients: Enter the maximum global wireless client value used here.
XPress™ Technology: Select the XPress™ technology state here. Options to
choose from are Enabled and Disabled.
Regulatory Mode: Select the regulatory mode state here. Options to choose from
are Disabled, 802.11h, and 802.11d.
Pre-Network Radar Check: Enter the pre-network radar check value used here.
This option is only available after the 802.11h regulatory mode was selected.
In-Network Radar Check: Enter the in-network radar check value used here. This
option is only available after the 802.11h regulatory mode was selected.
TPC Mitigation (db): Select the TPC mitigation value used here. Options to choose from are 0 (off), 2, 3, and 4. This option is only available after the 802.11h regulatory
mode was selected.
Transmit Power: Select the transmit power value used here.
WMM (Wi-Fi Multimedia): Select the WMM (Wi-Fi Multimedia) state here. Options
to choose from are Auto, Enabled and Disabled.
WMM No Acknowledgement: Select the WMM No Acknowledgement state here.
Options to choose from are Enabled and Disabled.
WMM APSD: Select the WMM APSD state here. Options to choose from are
Enabled and Disabled.
In this section we can configure the settings for the Guest/Virtual Access Point-1.
Parameters available for configuration are:
Enable Wireless Guest Network: Here we can enable or disable the wireless
guest network number 1.
Wireless Network Name (SSID): Here we can enter the wireless network name
(SSID) for the virtual access point 1.
Hide Wireless Network: Here we can enable or disable the option to hide the wireless network name of the virtual access point 1.
Client Isolation: Here we can enable or disable the client isolation feature for virtual access point 1.
Web User Interface Configuration Page 89