D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
IP Address for VPN: Enter the remote IP address for the VPN here.
IP Subnetmask: Enter the remote IP subnet mask for the VPN here. Notice that this option will not be available if Single Address was selected above.
Key Exchange Method: Select the key exchange method used here. Options to choose from are Auto (IKE) and Manual.
Authentication Method: Select the authentication method used here. Options to
choose from are Pre-Shared Key and Certificate (X.509).
Pre-Shared Key: Enter the pre-shared key value here. This option is only available
if the Pre-Shared Key option was selected as the authentication method.
Prefect Forward Secrecy: Here we can enable or disable the perfect forward secrecy feature.
Authentication Method: Select the authentication method used here. Options to
choose from are Pre-Shared Key and Certificate (X.509).
Certificates: Select an available certificate from the list here. This option is only
available if the Certificate (X.509) option was selected as the authentication
method.
Prefect Forward Secrecy: Here we can enable or disable the perfect forward
secrecy feature.
Advanced IKE Settings: Click on the Show Advanced Settings button to access
more advanced configuration parameters for this VPN Tunnel.
Click the Apply/Save button to accept the changes made.
Click the Cancel button to discard the changes made and return to the main page.
Web User Interface Configuration
Page 150