D-Link DSL-2870b User Manual page 113

D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
In this section a list of Inbound IP filtering rules will be displayed.
Click the Add button to add a new rule.
Click the Edit button to reconfigure the rule.
Select the Remove option and click the Remove button to remove the specific rule.
After clicking the Add button the following page is available.
In this section we can create a new Inbound Filtering rule.
Filter Name: Enter the Inbound filtering rule name here.
IP Version: Select the IP version from the list. Options to choose from are IPv4 and
IPv6.
Protocol: Select the protocol used from the list. Options to choose from are
TCP/UDP, TCP, UDP, and ICMP.
Source IP address: Enter the source IP address here.
Source Port: Enter the source port number here.
Destination IP address: Enter the destination IP address here.
Destination Port: Enter the destination port number here.
WAN Interfaces: Select the WAN interface that will be used for this incoming IP
filter rule.
Click the Apply/Save button to accept the changes made.
Click the Cancel button to discard the changes made and return to the main page.
Web User Interface Configuration Page 113