D-Link DSL-2870b User Manual page 43

Dual band wireless n750 gigabit adsl2+ modem router
Hide thumbs Also See for DSL-2870b:
Table of Contents

Advertisement

D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
In this section we can configure the following parameters.
Enable Wireless: Tick this option to enable the wireless feature on this router.
Hide Access Point: Here we can choose to hide the Wireless SSID by selecting
Enable to hide it and Disable to reveal it.
Country: Select your country from the drop-down menu here.
SSID: Enter the Wireless name (SSID) here. This name will be available when
wireless clients scan for available wireless networks. However, when the Hide
Access Point option is enabled, this name will not be visible to wireless
clients.
Channel: Here we can select a wireless channel manually, or select the Auto
option to allow the router to automatically select the channel with the least
interference.
802.11 Mode: Here we can select which 802.11 wireless modes to use. Options to
choose from are 802.11 B/G mixed, 802.11 B only, 802.11 G only, and
802.11 G/N mixed. If you are not sure, select the 802.11 B/G mixed option.
Bandwidth: Here we can select the wireless bandwidth range used. Option to choose from are 20MHz and Auto 20/40MHz.
Transmission Rate: Here we can select the wireless transmission rate. It is advisable to keep this option on Auto.
Clients Isolation: Here we can enable or disable the wireless client isolation feature.
Disable WMM Advertise: Here we can enable or disable the Wi-Fi Multimedia (WMM) advertisement feature.
Enable Wireless Multicast Forwarding (WMF): Here we can enable or disable the Wireless Multimedia Forwarding (WMF) feature.
Wireless Security Mode – None
This router supports five wireless security mode options available in the Security
Mode drop-down menu.
The first security mode is called None. By selecting this mode, there will be no
wireless security applied to your wireless network. This means that anyone with a
wireless adapter can connect to your network.
Click the Apply/Save button to accept the changes made.
Web User Interface Configuration
Page 43

Advertisement

Table of Contents
loading

Table of Contents