D-Link DSL-2870b User Manual page 19

D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
Step 3: Setup Internet connection
In this step, the user can configure the Internet connection settings used by this
router.
In this section we can configure the following parameters.
Country: In this drop-down menu, the user can select one of two country options.
They are Australia and New Zealand. To manually configure this connection,
the user can choose the third option called Other.
Internet Service Provider: After selecting a country, in the previous option, a list of
ISP connections will be available here. If your ISP is in the list, select it here
and the correct parameters will be entered for the rest of the page. However, if
your ISP is not listed here, you can choose the Other option.
Protocol: Select the appropriate protocol to use here. Options to choose from are
PPPoE, PPPoA, and Bridge.
Connection Type: Select the appropriate connection type to use here. Options to
choose from are VC-Mux and LLC.
VPI: Enter the correct Virtual Path Identifier (VPI) value for your ISP here.
VCI: Enter the correct Virtual Channel Identifier (VCI) value for your ISP here.
Username: After choosing to use PPPoE or PPPoA this option will be available. Enter the ISP connection account username used here.
Password: After choosing to use PPPoE or PPPoA this option will be available. Enter the ISP connection account password used here.
Confirm Password: After choosing to use PPPoE or PPPoA this option will be available. Re-enter the ISP connection account username used here.
Click the Back button to discard the changes made and return to the previous page.
Click the Next button to continue to the next page.
Click the Cancel button to discard the changes made and return to the main page.
Web User Interface Configuration Page 19