D-Link DSL-2870b User Manual page 135

D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
In this section we can configure the DSL settings for this router.
Select the modulation below: By selecting the modulation type here, it will be
Enabled. To disable the modulation type, leave the corresponding selection
blank.
Select the phone line pair below: Select which phone line should be used here.
Options to choose from are either Inner pair or Outer pair.
Capability: Select the DSL capability option here. Options to choose from are
Bitswap Enable and SRA Enable.
Click the Apply/Save button to accept the changes made.
Click the Cancel button to discard the changes made and return to the main page.
Click the Advanced Settings button to configure more advanced parameters,
concerning the DSL settings.
After clicking the Advanced Settings button the following page is available.
In this section we can configure the ADSL tone settings. Only one option can be
selected. Options to choose from are Normal, Reverb, Medley, No retrain, and L3.
Click the Back button to return to the previous page.
Click the Apply/Save button to accept the changes made.
Click the Cancel button to discard the changes made and return to the main page.
Click the Tone Selection button to open a new page where we can manually select
the tone.
Web User Interface Configuration Page 135