D-Link DSL-2870b User Manual page 31

D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
IPv4 Address: After enabling the Use Static IPv4 Address option we can enter the IPv4 address used here.
Enable PPP Debug Mode: Select this option to enable or disable the PPP debug
mode option.
Bridge PPPoE Frames Between WAN and Local Ports: Select this option to
enable or disable the bridging of PPPoE frames between WAN and local ports.
IGMP Multicast Proxy: Select this option to enable or disable the IGMP multicast
proxy option.
Obtain DNS Server Automatically: Select this option to obtain DNS server
addresses automatically.
WAN Interface selected: After selecting the Obtain DNS Server Automatically
option, we can select the WAN interface associated here.
Use the following DNS Server addresses: Select this option to enter DNS Server
addresses manually.
Preferred DNS server: After choosing to use Static DNS Server addresses, we can
enter the preferred DNS Server address used here.
Alternate DNS server: Enter the alternate DNS Server address used here.
Default Gateway / Interface: Select which interface's default gateway should be
used for this entry.
Click the Apply button to accept the changes made.
Click the Cancel button to discard the changes made.
Web User Interface Configuration Page 31