BMW R 1200 GS ADVENTURE Rider's Manual page 34

authorised BMW Motorrad
3
dealer.
32 Signal transmission
disrupted
" -- " or " -- --
the display.
The motorcycle has not
yet accelerated past the
threshold of approximately
30 km/h. The RDC sensors
do not start transmitting
signals until the motorcycle
reaches a speed above this
threshold ( 80).
Increase speed above this
z
threshold observe the RDC
readings. Assume that a
permanent fault has not oc-
curred unless the 'General'
warning light comes on to
accompany the symptoms.
Under these circumstances:
Have the fault rectified by a
specialist workshop, prefer-
ably an authorised BMW
Motorrad dealer.
Wireless communication with
the RDC sensors has been
disrupted. Possible causes
" appears on
include radio-communication
systems operating in the vi-
cinity and interfering with the
link between the RDC control
unit and the sensors.
Move to another location
and observe the RDC read-
ings. Assume that a per-
manent fault has not oc-
curred unless the 'General'
warning light comes on to
accompany the symptoms.
Under these circumstances:
Have the fault rectified by a
specialist workshop, prefer-
ably an authorised BMW
Motorrad dealer.
Sensor defective or system
error
General warning light
lights up yellow.
Indicated by " --
-- ".
Motorcycle is fitted with
tyres not equipped with RDC
sensors.
Fit wheels and tyres
equipped with RDC
sensors.
One or two RDC sensors
have failed.
Have the fault rectified by a
specialist workshop, prefer-
ably an authorised BMW
Motorrad dealer.
A system error has occurred.
Have the fault rectified by a
specialist workshop, prefer-
ably an authorised BMW
Motorrad dealer.
" or " --