Push the air filter into the air
7
filter housing at the bottom,
making sure that the vanes
128
are not bent.
z
Position intake air pipe 2 on
the air filter housing.
Push retaining clips 1 into
the holders until they en-
gage with an audible click.
Check that the throttle-valve
cable is seated in guide 4
of the intake and that the
throttle valve is seated
against the stop.
Seat the knee cover in hold-
er 3.
Install screws 2 and 1.
Seat side panel 2 in hold-
ers 3 and 4.
Install screw 1.