BMW R 1200 GS ADVENTURE Rider's Manual page 122

7
120
Install plug 3.
z
Turn cover 1 for low-beam
headlight clockwise to in-
stall. Make sure that the
wording TOP is at the top.
Turn cover 2 for high-beam
headlight clockwise to in-
stall. Make sure that the
wording TOP is at the top.
Replacing parking-light
bulb
If it is not standing firmly,
the motorcycle could
topple in the course of the
operations described below.
Always make sure that the
motorcycle is stable and
firmly supported.
Make sure the ground is
level and firm and place the
motorcycle on its stand.
Switch off the ignition.
Turn the handlebars all the
way to the right
Pull bulb carrier 1 out of the
headlight housing.
Remove the bulb from the
bulb socket.
Replace the defective bulb.
Parking-light bulb
W5W / 12 V / 5 W
Install the bulb in the bulb
socket.