Connecting A Dvd Player; Monitor Out; Rear Panel Connections - Panasonic TX-76PW150A Operating Instructions Manual

Rear Panel Connections

Connecting a DVD Player to the Television
Most DVD players have both a composite video and YP
a better picture and we recommend that you use this output. If your DVD player does not have YP
output, the next most desirable option is the S-Video Out terminal. Finally, if YP
available, use the normal video output.
DVD
AUDIO OUT
L
R
DVD PLAYER
DVD OUT
Y-P -P
B R
P
R
P
B
DVD Connection using YP
The Monitor Out terminals reproduce the signals currently on the television screen. The on-screen signals
could be a television programme or signals connected to one of the AV inputs.
The Monitor Out facility can be used to allow one video source (videotape, videodisc etc.) to be
connected to more than one television. Connect the Monitor out from this television to the AV Input of the
second television.

Monitor Out

If a video recorder is connected to the Monitor Out and video sources are connected to one or more of
the AV inputs, the television becomes a visual display for tape editing or copying.
TV used as a Monitor
NOTE:
Never connect the same video recorder or other device to both the VIDEO IN and MONITOR OUT
terminals of this television as this could cause incorrect operation.
Unauthorised recording of material from Television Broadcasts or from other video
AV4
IN
P P
Y
R B
P
B R
AV
INPUT
P a n a s o n i c
VIDEO
L
AUDIO
R
VCR
WARNING
and / or audio sources may contravene copyright laws
P video outputs. The YP
B R
B
DVD OUT
S - VIDEO
L
AUDIO
R
DVD PLAYER
DVD Connection using S-Video Out
DVD OUT
VIDEO
L
AUDIO
R
DVD PLAYER
DVD Connection using Video Out
MONITOR
OUT
P system produces
B R
P
B R
P and S-Video are not
R
AV1 IN
AV4
IN
P P Y
R B
35