Preset; Selecting The Country System And Changing The Teletext Language - Panasonic TX-76PW150A Operating Instructions Manual

Main Menu - Preset
Using the Remote Control
1. Push the MAIN MENU button.
2. Move to the PRESET Menu using the Up or
Down button.
3. Choose the PRESET Menu by using the
Left or Right buttons.
4. Choose the function to change using the Up
or Down button.
5. Adjust the setting of the function using the
Left or Right buttons.
6. Push the MAIN MENU button repeatedly
until you return to normal viewing.
SYS SELECT
The television has two system modes: Australian and New Zealand / Indonesian.
Use the Left or Right buttons to switch between AUSTRALIA and NZ/INDONES.
AUTO TUNE
Used to automatically retune all programme location numbers.
Please refer to page 22.
MANUAL TUNE
Used to manually retune individual programme location numbers.
Please refer to page 23.
POS. SETUP
This option opens a new menu giving access to COLOUR SYS, FINE TUNE, SKIP, AVL and CH
COLOUR SET.
Please refer to page 26.
GEOMAGNETIC
All televisions, particularly large screen televisions, are affected by the earth's Magnetic Field. The
symptom may show up as blurring of colours or strange discoloured patches. The location and direction
of the television can add to the interference problem. The Geomagnetic Correction option can be used to
overcome some of these effects.
Please refer to page 24.
EXIT
ACCESS
SELECT
Using the Front Panel Controls
1. Open the front door.
2. Press the PRE. button once. The PRESET
Menu will be displayed.
2. Choose the function to change using the
PRE. button.
3. Adjust the setting of the function using the
Volume Up ( + ) or Down ( - ) buttons.
4. Push the PRE. button repeatedly until you
return to normal viewing.
POS. SETUP
COLOUR SYS
FINE TUNE
SKIP
AVL
CH COLOUR SET
AUTO
ACCESS
OFF
ON
-----------|-----------
21