Rear Panel Connections; Connecting A Dvd Player Or Set Top Box To The Av Input; Connecting S-Video Equipment To The Av Input - Panasonic QUINTRIX TX-86PW300A Operating Instructions Manual

Widescreen stereo colour television with teletext

Hide thumbs

Table Of Contents

Table of Contents

When using a VCR with the television always connect the Aerial to the VCR and connect an RF Cable (not

supplied) between the VCR RF-Out and the television RF-In.

You can watch videos by either tuning the television to the VCR

(see page 27) or by connecting the VCR to the rear AV terminals.

Note: When connecting a mono VCR through the RF-In, please switch the TV to mono.

Connecting a DVD player or Set-top Box to the AV Input

The audio and video inputs on the television are RCA type connectors.

Connect the Y, P

and P

Connect the "AUDIO OUT"

to the AV1 IN AUDIO

terminals on the television.

You can also use the AV4

IN for DVD or Set Top Box

connections.

Note:

Some DVD players and set-top boxes only have an RCA "VIDEO OUT" terminal. This can be connected to

any of the VIDEO Inputs on the television. Connect the "AUDIO OUT" to the corresponding AUDIO terminals

on the television.

Connecting S-Video Equipment to the AV Input

S-Video equipment

uses a 4Pin Mini Din

(Male) plug for the

video and RCA plugs

for the audio.

Note:

When an S-Video cable

is connected to an

S-Video input terminal,

the RCA video terminal

for that AV position will

be disconnected.

Connecting Equipment to the TV

outputs from the DVD to the AV1 DVD Inputs on the television, as shown below.

DVD PLAYER

DVD OUT

Y-P -P

VIDEO OUT

AUDIO OUT