Protecting The Environment; Ec Declaration Of Conformity - Black & Decker KS600E Original Instructions Manual

♦ When cutting thin sheet metal, clamp a piece
of scrap wood to the back surface of the
workpiece and cut through this sandwich.
♦ Spread a fi lm of oil along the intended line of
cut.
Maintenance
Your Black & Decker tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper care and regular cleaning.
Warning! Before performing any maintenance
or cleaning, make sure that the tool is switched
off and unplugged and that the saw blade has
stopped.
♦ Regularly clean the ventilation slots in your tool
and charger using a soft brush or dry cloth.
♦ Regularly clean the motor housing using
a damp cloth. Do not use any abrasive or
solvent-based cleaner. Never let any liquid get
inside the tool and never immerse any part of
the tool into liquid.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fi tted:
♦ Safely dispose of the old plug.
♦ Connect the brown lead to the live terminal in
the new plug.
♦ Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth
terminal. Follow the fi tting instructions supplied
with good quality plugs. Recommended fuse: 5 A.

Protecting the environment

Separate collection. This product must
not be disposed of with normal household
waste.
Should you fi nd one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Re-use of recycled
materials helps prevent environmental
pollution and reduces the demand for raw
materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
Black & Decker provides a facility for the collection
and recycling of Black & Decker products once
they have reached the end of their working life. To
take advantage of this service please return your
product to any authorised repair agent who will
collect them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
Black & Decker offi ce at the address indicated
in this manual. Alternatively, a list of authorised
Black & Decker repair agents and full details of our
after-sales service and contacts are available on
the Internet at: www.2helpU.com
Technical data
Input voltage
Power input
No-load speed
Max. depth of cut
Wood
Steel
Aluminium
Weight
Level of sound pressure according to EN 60745:
Sound pressure (L
pA
3 dB(A), Sound power (L
(K) 3 dB(A)
Vibration total values (triax vector sum) according
to EN 60745:
Cutting wood (a
h,cw
2
2.4 m/s , Cutting sheet metal (a
uncertainty (K) 1.5 m/s

EC declaration of conformity

MACHINERY DIRECTIVE
KS600E/KS601E/KS602E/KS603E
Black & Decker declares that these products
described under "technical data" are in compliance
with: 2006/42/EC, EN 60745-1, EN 60745-2-11
For more information, please contact
Black & Decker at the following address or refer to
the back of the manual.
ENGLISH
KS600E/KS601E
KS602E/KS603E(Type 1)
V 230
AC
W 450
-1
min 0-3,000
mm 60
mm 5
mm 10
kg 1.9
) 89 dB(A), uncertainty (K)
) 100 dB(A), uncertainty
WA
) 7.7 m/s 2, uncertainty (K)
) 9.1 m/s
h,cm
2
2
,
9