Intended use protected supply. Use of an RCD reduces the risk of electric shock. Your Black & Decker jigsaw has been designed for sawing wood, plastics and sheet metal. This tool is intended for 3. Personal safety consumer use only. a.
Page 4
tool or these instructions to operate the power tool. Be aware of hidden hazards, before cutting into Power tools are dangerous in the hands of untrained walls, floors or ceilings, check for the location of users. wiring and pipes. e. Maintain power tools. Check for misalignment or The blade will continue to move after releasing the binding of moving parts, breakage of parts and any switch.
Page 5
When assessing vibration exposure to determine safety Insert the shank of the saw blade (7) into the blade measures required by 2002/44/EC to protect persons holder (8) as far as it will go. regularly using power tools in employment, an estimation of Slightly tighten the two screws (6) alternately to position vibration exposure should consider, the actual conditions of the blade, then fully tighten the two screws (6).
Protecting the environment The shoe should be held firmly against the material being cut. This will help prevent the saw from jumping, reduce Separate collection. This product must not be vibration and minimise blade breakage. disposed of with normal household waste. Let the blade run freely for a few seconds before starting the cut.
If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 AST7XC, KS495, KS500, KS501, KS502 months from the date of purchase, Black & Decker Black & Decker declares that these products conform to:...