Table of Contents
Advertisement
8.
Move the On/Off/Program switch on the Mini PowerWedge
to the
ON
NOTE
User's Guide
position.
When serial input is enabled, you can still use a
wand to input data. However, input from lasers,
CCDs, and magnetic stripe readers is disabled. To
program the Mini PowerWedge while it is in serial
input mode, use a wand to read batch or menu bar
codes, or use on-screen programming. (see "Pro-
gramming the Mini PowerWedge" on page 9 for
information about programming methods.)
7
Advertisement
Table of Contents
