Bar Codes For Programming The Mini Powerwedge; Alphabetical List Of Contents - PSC Mini PowerWedge User Manual

Bar Codes for Programming the
This section provides bar codes for common parameter settings for
the Mini PowerWedge. Factory default settings (D2) are underlined.
If you need to make settings that are not provided in this section, see
the section titled, "Programming the Mini PowerWedge."
"Cloning" on page 23
"Codabar/Ames" on page 37
"Code 11" on page 34
"Code 128" on page 42
"Code 39" on page 23
"Code 93" on page 48
"EAN/JAN" on page 46
"Host Device" on page 58
"Interleaved 2 of 5" on page 26
"Labelcode 4/5" on page 43
"Magnetic Stripe Channels" on page 49
"Matrix 2 of 5" on page 30
"MSI/Plessey" on page 39
"Other Controls" on page 51
"Predefined Defaults" on page 22
"Standard 2 of 5" on page 32
"UPC-A" on page 44
"UPC-E" on page 45
"UPC/EAN/JAN Extensions" on page 47
*$+$-D0EE*
DO
*$+$-D1EE*
D1
*$+$-D2EE*
D2
22
Mini PowerWedge

Alphabetical List of Contents

Predefined Defaults
Mini PowerWedge
®