Memory Selection; Selecting Memory Functions; Saving Memory Settings - Lincoln Electric ASPECT 375 Operator's Manual

ASPECT™ 375

Memory Selection:

The memory function allows the operator to save up to 9
specific welding procedures. This memory switch has
two functions:
1. Save memory settings
2. Recall memory settings.

Selecting Memory Functions

Pressing the memory button will allow the user to toggle
between "saving" a memory, "recalling" a memory or
operating without using a memory setting as seen in
Figure B.19.

Saving Memory Settings

In order to save process settings into a memory location
it is first necessary to press the memory button so that
the "memory save" icon is illuminated. Once illuminated,
the number on the screen will flash to indicate this
number can be changed by turning the control knob, and
the voltage and amperage meters will say "MEM SET."
Once the desired memory location has been selected
using the control knob, pressing and holding the memory
button for 3 seconds will save the settings in that
location. During the 3 second hold period the "memory
save" icon will flash. After 3 seconds the displayed
settings will be saved to memory.
Summary:
1. Press Memory button to highlight "Memory Save"
icon
2. Turn Control Knob to select memory location
3. Press and hold memory button for 3 seconds
4
SAVE
MEM
MEM
B-10
OPERATION
FIGURE B.18
4
FIGURE B.19
4
RECALL MEMORY NOT
FIGURE B.20
SET 4
FIGURE B.21
3 Seconds
SET 4
IN USE