ASPECT™ 375
OUTPUT CONNECTIONS
FIGURE A.4
TWIST-MATE
ELECTRODE / GAS
OUTPUT STUD
The ASPECT™ 375 is equipped with Twist-Mate style front output
studs. To connect cables, turn the power switch "OFF." Connect
the torch Twist-mate plug into the electrode gas output receptacle
on the front of the machine and turn clockwise until tight. This
quick connect terminal also provides the gas connection for the
shielding gas to the torch.
Refer to the following connection diagrams for specific information
on connecting water cooled and air cooled torches.
E
D
C
6-PIN REMOTE CONTROL CONNECTOR
Function
Pin
6-pin remote
A
77 Remote potentiometer, 5K
control con-
76 Remote potentiometer, wiper
B
nector for
C
75 Remote potentiometer, common
remote or
D
Trigger, common
hand/foot
E
Trigger, input
amptrol.
F
Ground
TWIST-MATE
WORK STUD
6-PIN REMOTE
CONTROL CONNECTOR
15VDC SUPPLY
F
A
B
Wiring
A-5
INSTALLATION