Dometic CK36H401RI Installation Manual page 13

Dometic Harrier Inverter
See fig. 9
➤ Make an opening on one side in order to feed through the electrical power
supply cable.
➤ Feed the 240 Vw cable through the opening into the vehicle interior.
8.5 Installing the roof air conditioner ADB
A
NOTICE! Risk of damage
Observe the structural strength of the roof of the vehicle. The roof
of the vehicle must be able to bear the weight of the roof air con-
ditioner. The roof must not be indented or deformed by the weight
of the unit, even over a longer period of time.
Attaching the roof air conditioner
See fig. a
➤ Fit the roof frame (2) onto the roof of the vehicle over the opening.
I
NOTE
so
Ensure the roof frame is oriented correctly based on opening size
otherwise this will cause problems with installation later (refer to
markings on the plate).
➤ Seal it with flexible, non-hardening butyl sealing compound.
➤ Position the duct insert (1) into the roof frame (2).
➤ Lift the roof air conditioner onto the roof of the vehicle.
➤ Position the roof air conditioner over the installation opening.
Observe the direction of travel.
➤ Choose the suitable duct seal in accordance with the following table:
Roof thickness
30 – 60 mm
60 – 100 mm
EN
Seal type
transition duct
seal – thicker roof
(transition duct not required)
Installation
13