Kenwood drv-410 Instruction Manual page 26

Various Settings
Setting the Date and Time
Set the date and time of the device.
1.
Press the [MENU/OK] button.
MENU appears.
2.
Use the [ J ]/[K] buttons to select
<System settings> and then press
the [MENU/OK] button.
1
2
1
3.
Use the [ J ]/[K] buttons to select
<Date/time> and then press the
[MENU/OK] button.
1
2
1
4.
Use the [ J ]/[K] buttons to select an
item and then press the [MENU/OK]
button.
1
2
1
22
Set the date and time
Automatic automatically using the time
received from a GPS satellite.
Manual Set the date and time manually.
5.
Set the timezone setting or date/time
setting.
Use the [ J ]/[K] buttons to select the
time zone or date and time and then
press the [MENU/OK] button.
When automatic was selected, the timezone
settings is displayed.
1
2
1
When manual was selected, the date/setting is
displayed. Repeat the same operation to set the
date and time.
1
2
1
6.
Press the [
the procedure.
• The device sets the date and time
automatically using the coordinated
universal time (UTC) received from a GPS
satellite.
• If the date and time are set automatically,
setting the correct time may not be
possible until a GPS satellite signal can
be received normally.
] button to end