ADEMCO Vista-15 Installation And Setup Manual page 96

VISTA-15/VISTA-15CN Installation and Setup Guide
Summary Mode Display
Default Descriptor
19–2
www.PDF-Zoo.com
3. Press 1 (Yes).
C u s t o m W o r d s ?
0 = N o , 1 = Y e s 0 0
4. Press 0 (No).
†
È
Z N 0 1 Z O N E 0 1
Flashing Cursor (system
is ready for entry of
word).
È
5. To delete or change the default descriptor for zone 1, press
Z N 0 1
Flashing Cursor È
6. Press [#] plus the 3-digit number for the first word from the
Z N 0 1 B A C K
7. Press 6 to accept the selected word and continue.
Z N 0 1 B A C K
Ç
Flashing Cursor if "6" is
pressed (system is
ready for next word) .
8. Enter the 3-digit number for the next word. In our example, the
Z N 0 1 B A C K
D O O R
Ç
Flashing Cursor
The Custom Words ? prompt appears.
†
The system then automatically displays the
descriptor for zone 1.
The procedure for adding custom words/numbers to the built-in
vocabulary is given in "Adding Custom Words" on the next page.
If you did not enter a descriptor previously for zone 1, the keypad
displays the default descriptor for zone 1.
Note that this is a "summary mode," and that no entries can be
made. Entries can be made only when the display contains a
flashing cursor, which signifies the "entry mode."
plus the same zone number (01). This clears that descriptor
and allows changes to be made at the flashing cursor.
NOTE: If you do not wish to change the existing descriptor for
zone 1, enter plus the next zone number for which you wish to
enter (or check) a descriptor. A summary display for that zone
appears. You must then press [ ] plus the same zone number
again to gain access to the entry mode (flashing cursor) for that
zone.
Alpha Vocabulary List.
EXAMPLE: The descriptor that we wish to enter for zone 1 is
BACK DOOR. From the list, BACK = 013. Therefore, we enter
[#] 0 1 3.
NOTE: If you accidentally enter the wrong word, simply press [#]
plus the correct 3-digit number for the word you want.
NOTE: If this is the only word you are using for the descriptor,
press 8 instead of 6 to save that word in memory, and then go to
step 11.
word is DOOR, whose number is 057.
Enter [#] 0 5 7. The display at left appears.