Toshiba e-studio 2000ac Safety Information Manual page 9

Except the U.S.A. and Canada
e-STUDIO2505AC/3005AC/3505AC
The unit is classified as Class 1 Laser Product according to IEC60825-1:2014 including amendments.
The unit uses laser diodes with a max. output of 25 mW, a wavelength of 788 nm at a continuous
pulse.
e-STUDIO4505AC/5005AC
The unit is classified as Class 1 Laser Product according to IEC60825-1:2014 including amendments.
The unit uses laser diodes with a max. output of 15 mW, a wavelength of 792 nm at a continuous
pulse.
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
The unit is classified as Class 1 Laser Product according to IEC60825-1:2014 including amendments.
The unit uses laser diodes with a max. output of 25 mW, a wavelength of 788 nm at a continuous
pulse.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
For the EU only
Working environment
From EMC (Electromagnetic Compatibility) point of view, the operation of this product is being
restricted in following environments:
 Medical Environments: This product is not certified as a medical product according to the Medical
Product Directive 93/42/EEC.
 Domestic environments (e.g. a private living room with TV / Radio sets in the nearby surrounding
area) because this is a so called EMC class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate measures!
Any consequences resulting from the use of this product in restricted working environments are not
the responsibility of TOSHIBA TEC.
The consequences of the use of this product in restricted working environments may be an
electromagnetic interference with other devices or machines in the nearby surrounding area. This
can result into malfunction including data loss / data error pertaining to this product or the other
devices / machines involved in the electromagnetic interference.
Furthermore, for general safety reasons, the use of this product in environments with explosive
atmospheres is not permitted.
CE compliance
This product is labelled with the CE mark in accordance with the provisions of the applicable
European Directives, notably the Low Voltage Directive 2006/95/EC (before 2016-04-20), 2014/35/EU
(after 2016-04-20), the Electromagnetic Compatibility Directive 2004/108/EC (before 2016-04-20),
2014/30/EU (after 2016-04-20), the RoHS Directive 2011/65/EU for this product and the electric
accessories, the Radio Equipment and Telecommunications Terminal Equipment Directive 1999/5/
EC for the telecommunication accessories.
CE marking is the responsibility of TOSHIBA TEC GERMANY IMAGING SYSTEMS GmbH, Carl-Schurz-
Str. 7, 41460 Neuss, Germany, phone +49-(0)-2131-1245-0.
For a copy of the related CE Declaration of Conformity, please contact your dealer or TOSHIBA TEC.
Safety Information 9