Printfeaturesswitch - Texas Instruments 880 User Manual

6. Press the Change key. The printer now
lists the next character set choice for GL.
GO = GOTHIC OPTIONAL CHARACTER SET
G1 = GOTHIC
G2= GOTHIC
G3 = GOTHIC OPTIONAL CHARACTER SET
GL= GO G1
7.
Press the Change and Accept· keys to
make the desired character set selection
for GL. The choices are GO, G1, G2, and
G3.
8. After you make a character set selection
for GL, the printer underlines your choice
and lists the currently selected character
set choice for GR.
GO= GOTHIC
G1 = GOTHIC
G2= GOTHIC
G3= GOTHIC
GL= GO G1
GR= G1
OPTIONAL CHARACTER SET
OPTIONAL CHARACTER SET
G2
9.
Press the Change and Accept keys to
make the desired character set selection
for GR. The choices are G1, G2, and G3.
CHAR: GO = OPTIONAL CHARACTER SET;
G1 = GOTHIC
G2= GOTHIC;
G3 = OPTIONAL CHARACTER SET
GL= G2; GR = G3
10. After you make the character set selec-
tion for GR, the printer prints a new char-
acter set report based on your selections.
3-16
11. Press the Accept key to accept the new
character set report. The printer returns
to the command mode.
12. Press the Normal key to return to the
normal mode.
3.4
PRINTFEATURESSWITCH
There are twelve positions of the Print Features
switch (See Figure 3-6):
•
•
•
Host-With the Print Features switch in
the Host position, the host can control all
printer features.
Preset-With the Print Features switch
in any of the five Preset positions, char-
acters-per-inch and font (draft or
enhanced) are determined by the switch
position. Other form report features and
character set designations can be pro-
grammed in the menu mode.
Programmable-With the Print Fea-
tures switch in any of the six Pro-
grammable positions (A through F), the
active print features can be those selected
from the form and character set menus
while the Print Features switch was in
that position. Six different combinations
of font, characters-per-inch, lines-per-
inch, form length, perforation-skip, verti-
cal tabs, and character set designations
can be programmed from the control
panel.
NOTE
The configuration codes are the same
for all positions of the Print Features
switch.