Character Set Designations; Changing Character Set Selections - Texas Instruments 880 User Manual

Follow these steps to print the character set
report:
1. Open the printhead door.
2. Press the Command key. The Normal
indicator turns off and the Command
indicator turns on.
3. Press the Menu key. The Menu indica-
tor turns on. The printer immediately
prints a form report.
4. Press the Accept key. The printer
immediately prints a configuration
report.
5.
Press the Accept key again. The printer
immediately prints a character set
report.
The following example shows a typical character
set report.
CHAR: GO
=
GOTHIC
G1
=
GOTHIC
G2
=
GOTHIC
G3
=
GOTHIC
GL
=
GO; GR = G1
3.3.3.1 Character Set Designations. See
Section
5
for an explanation of the GO, G1, G2,
G3, GL, and GR character set designations.
3.3.3.2 Changing Character Set Selections.
Follow these steps to make character set selec-
tions:
1. After you have printed a character set
report as described in paragraph 3.3.3,
"Character Set Report and Menu," press
the Change key. The printer lists the cur-
rently selected character set for GO, as
shown in the next example.
GO= GOTHIC
2. Press the Change key. The printer now
shows the next character set choice.
GO
=
GOTHIC OPTIONAL CHARACTER SET
3. Press the Accept key to select the
optional character set for GO. (Or, if you
have other character set ROMs installed,
you can keep pressing the Change key,
and the other character set choices will be
listed until you press the Accept key to
select one.) The printer now underlines
your choice for GO and lists the currently
selected character set choice for G1, as
shown in the following example.
GO
=
GOTHIC OPTIONAL CHARACTER SET
G1 = GOTHIC
4. Press the Change and Accept keys to
make selections for G1 through G3 in the
same manner you made the GO character
set selection.
5.
After you make character set selections
for GO through G3, the printer will list the
currently selected character set for GL, as
shown below.
GO = GOTHIC OPTIONAL CHARACTER SET
G1 = GOTHIC
G2= GOTHIC
G3 = GOTHIC OPTIONAL CHARACTER SET
GL= GO
3-15