Checking Host-Controlled Margins; Menu; Menu); Menu Mode (Configuration Menu) - Texas Instruments 880 User Manual

3.3.1.3 Checking Host-Controlled Margins.
The left, right, top, and bottom margins (LM, RM,
TM, and BM) are controlled by the host software.
Printing the form report shows how the margins
have been set. Print the form report and press the
Normal key to return printer control to the host.
3.3.2 Configuration Report and Menu
The following features can be selected on the con-
trol panel (Figure 3-4) from the configuration
menu:
•
•
•
•
•
Communication mode
Baud rate
Parity
National language
Miscellaneous features
Menu Mode
Configuration Report and Menu
3-8
Key sequence for 1.
printing configu-
ration report and
menu: Command
Print
Features
Press to return
to normal mode.
Enh:onCID'~2
oHO" A B
16 C
12 D
10 F E
Draft
I
Preset
I
Programmable
Menu
1. Press to accept configuration report
printed and print character
set
report
(only
if
optional character set ROMs
are installed).
2.
Menu
Paper Out
0
0
Error
2. Press to accept configuration menu option
printed and print next configuration option.
3. Operations:
Setting serial/parallel mode,
baud rate, parity, national
Accept language, and miscellaneous
configuration parameters.
On
~~i~~
t
Form
0
Line Feed
• Power
P <I
yTab
setTopbD
Set of form
Tabb.]
[ ] Tab
1 _ _
1 Clear
line
D
~
Feed - -
Reset
~~i~~+
--"line
Feed
1. Press to reject configuration report printed
and begin printing configuration menu.
2. Press to reject configuration menu option
printed and print next configuration option.
2222627·20
NOTE
Returning to normal mode in the middle of any option listing will
cause the printer to retain the last selection printed.
Figure 3-4. Menu Mode (Configuration Report and Menu)