Printing The Barberpole - Texas Instruments 880 User Manual

2222627-8
Figure 2-12. Printhead Adjustment Lever
2. Print a barberpole test (described in
subsection 2.9). Ink smears will appear on
the paper if the printhead is too close to
the platen. Incomplete characters or no
characters will appear if the printhead is
too far from the platen.
3. Continue adjusting the printhead and
printing barberpole tests until the print
appears sharp and dark.
NOTE
Adjusting the printhead cannot com-
pensate for a worn-out ribbon. Replace
the ribbon if the printed characters are
too light.
2.9 PRINTING THE BARBERPOLE
Before printing the barberpole test, the printer
must be off line. If the On Line indicator is on,
press the On Line key once to set the printer off
line.
To print a barberpole test, sequentially press the
Normal, Command, Test, and Change keys.
To stop the barberpole test, press the Accept or
the Normal key.
NOTE
If a current loop or an RS422 Interface
option is installed, a parity error, code
24, may occur. This error does not
affect printer operation.
~()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]~_'abcdef~
()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]~_'abcdefgt
)*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]A_'abcdefgh:
*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]A_'abcdefghi,
+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]A_'abcdefghij~
,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\J~_'abcdefghijkO
-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]~_'abcdefghijklr
./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\J
A
_'abcdefghijklmr
10123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]~_'abcdefghijklmn(
0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]A_'abcdefghijklmno~
123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]A_'abcdefghijklmnop(
23456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\J
A
_'abcdefghijklmnopqr
Figure 2-13. Barberpole Printout
2222627-15
2-8