Water softener
^ Remove the funnel and wipe any
residual salt off the seal and the
screw threads on the socket.
^ Screw the cap back on firmly.
^ Run the "Rinse" programme to
remove any traces of salt from the
cabinet.
The programme sequence may be
delayed for a few minutes after the
start of the "Rinse" programme. This
is not a fault. The water softener is
being reactivated.
18
Add salt indicator
Reactivation takes place automatically
during a programme.
The programme sequence indicator
light a "Recharging" lights up whilst
this is happening.
^ Add salt when the Add salt b
"Recharge Softener" indicator lights
up.