Setup Menu List; Scene File Screen - Panasonic SD AG-HPX171E Operating Instructions Manual

Setup menu list

SCENE FILE screen

Item
LOAD/SAVE/INIT
OPERATION TYPE
FRAME RATE
SYNCRO SCAN
DETAIL LEVEL
V DETAIL LEVEL
DETAIL CORING
CHROMA LEVEL
CHROMA PHASE
COLOR TEMP Ach
Display
mode
(Camera) LOAD:
Loads the scene file settings saved using SAVE.
SAVE:
Saves the changed scene file settings.
INITIAL:
The settings of the scene file selected with the scene file dial are
returned to the factory settings.
(Camera) Switches the shutter and frame rate operation to the video type or film
type.
VIDEO CAM: SYNCRO SCAN is displayed using 1/n units.
FILM CAM: SYNCRO SCAN is displayed as an angle.
(Camera) Selects the shooting interval and exposure time when 720P and FILM
CAM is selected. The DEFAULT value is dependent on the frame rate
of the recording format.
When SYSTEM FREQ is set to 50 Hz
DEFAULT, 1, 15, 18, 0, 1, , 3, , 5, 6, 7, 8, 30, 3, 3, 37,
, 5, 8, 50 FRAME
When SYSTEM FREQ is set to 59.9 Hz
DEFAULT, 1, 15, 18, 0, 1, , , 5, 6, 7, 8, 30, 3, 3, 36, 0,
, 8, 5, 60 FRAME
(Camera) Adjusts the synchro scan shutter speed used for shooting images on a
TV screen, etc.
Pushing the Operation lever the e or r direction and holding it down
will cause the values to change at a faster rate.
When VIDEO CAM is selected as the OPERATION TYPE option
setting:
• 50P/50i:
1/50.0...1/8.9
• 25P/25PN:
1/5.0...1/8.0...1/8.9
• 60P/60i:
1/60.0...1/9.8
•
30P/30PN:
1/30.0...1/8.0...1/9.8
• 24P/24PA/24PN:
1/.0...1/8.0...1/9.8
When FILM CAM is selected as the OPERATION TYPE option setting:
The shutter speed is displayed as an angle such as "180.0 d."
10.0 deg...180.0 deg...360.0 deg (the angle can be changed in
increments of 0.5 degrees)
(Camera) Adjusts the level of the image outline correction (in the horizontal and
vertical directions).
-7...0...+7
(Camera) Adjusts the level of outline correction in the vertical direction.
-7...0...+7
(Camera) Adjusts the level of noise reduction of the detail signal.
-7...0...+7
Set to – for a clearer image. Noise increases slightly.
Set to + to reduce noise.
(Camera) Adjusts the chroma level.
-7...0...+7
(Camera) Makes fine adjustments to the chroma phase.
-7...0...+7
(Camera) Makes fine adjustments to the color temperature (after white balance
Ach adjustment).
-7...0...+7
Description of settings
ENGLISH
E-99