Thumbnail Screen; Basic Thumbnail Screen Operations - Panasonic SD AG-HPX171E Operating Instructions Manual

Thumbnail screen

Video data created on the P2 card in one shooting session is called a clip. When the MCR mode has been
established, the clips will be displayed on the LCD screen as thumbnails. (When there is a large number of
clips, it will take some time for them to be displayed on the screen.)
You can perform the following operations using the thumbnail screen.
• Play, repair and delete clips, add and delete shot marks, as well as add text memos.
• Format P2 cards and SD memory cards.
• Load the metadata (shooting information, etc.) from SD memory cards to the unit.

Basic thumbnail screen operations

To use the thumbnail menu:
1
On the thumbnail screen, press the MENU button to display the menu.

Push the Operation lever in the e or r direction and press it (or push
it in the q direction).
If another menu appears, repeat this step.
• To return to the previous screen, select EXIT and press the Operation
lever or push it in the w direction.
• To release the menu mode, press MENU.
To select a clip: Push the Operation lever in the w or q direction to move the yellow frame to the clip you
want to select, and press it again. (The frame changes to blue.) Pressing the Operation lever a second
time deselects the thumbnail. To scroll the pages, press the PAGE (- or +) button.
To Play back clips: Select a thumbnail and push the Operation lever in the q (playback) direction. (For
details on playback, see Page 64.)
• Only clips recorded in the same format as the playback format (6 in the figure below) can be played
back.
1
2
3
4
5
6
THUMBNAIL
ALL CLIP
SAME FORMAT CLIPS
SELECTED CLIPS
MARKED CLIPS
TEXT MEMO CLIPS
SLOT CLIPS
SETUP
EXIT
• Thumbnail screens are output only from the VIDEO OUT terminal.
OPERATION
DELETE
FORMAT
REPAIR CLIP
RE-CONNECTION
EXCH. THUMBNAIL
EXIT
PROPERTY
CLIP PROPERTY
CARD STATUS
DEVICES
PROPERTY SETUP
SYSTEM INFO
EXIT
(Continued on the next page)
ENGLISH
1 1 2 2
MENU MENU THUMBNAIL THUMBNAIL
PUSH-SET PUSH-SET
PAGE/AUDIO MON/VAR PAGE/AUDIO MON/VAR
7
8
META DATA
LOAD
RECORD
USER CLIP NAME
INITIALIZE
PROPERTY
EXIT
E-65