Installing And Removing The Power Supply; Installing And Removing The Battery; Connecting And Disconnecting The Power Cord - Panasonic SD AG-HPX171E Operating Instructions Manual

Installing and removing the power supply

Installing and removing the battery

Installation
1
Insert the battery until it clicks into place.

Connecting and disconnecting the power cord

Installation
1
Connect the DC cord to the AC adapter.

Plug the AC power supply cord into the
power outlet.
3
Slide the DC cord's battery connector to
the direction of the arrow until it clicks into
place.
E-16
DC cord's battery
connector
Removal
1
Set the POWER switch to OFF, and check
that the mode lamp is off.

While pressing the battery release button,
raise up the battery to remove it.
• Support the battery with your hand to ensure
that it will not fall.
Mode lamp
Battery release button
Removal
1
Set the POWER switch to OFF, and check
that the mode lamp is off.

Slide the DC cord's battery connector to
the direction of the arrow while pressing
the battery release button.
Battery release button
3
Disconnect the AC power supply cord from
the power outlet.
CAUTION:
• You cannot charge the battery when
supplying power to the camera-recorder from
the AC adapter.
• Disconnect the AC power supply cord from
the power outlet when the unit is not going to
be used.