Table of Contents
Advertisement
10.1 Annual Product
Inspection
The correct function of the mobility base and
seating system should be checked before
every use. The table of checks listed below
are to be carried out by the user at the
intervals shown. Failure to carry out these
checks may lead to problems arising that
could invalidate the warranty.
Check
Brake/Wheel lock function
Security of seating system
Firm attachment of wheels
Firm attachment of handle bar
Bearing contamination
Screw connections
Visual examination of wearing parts (e.g. Tires, bearings)
Spoke tension if 22" or 24" wheels are used
Should any defects become apparent,
please contact an authorised dealer.
It is also recommended that your mobility
base is serviced every 12 months by an
authorised dealer.
Weekly
Monthly
Advertisement
Table of Contents
