Switching the cooktop on
Activating a cooking zone
Selecting the power setting
Changing the power setting
Do not leave the appliance unattended whilst it is being
used.
^ Touch the s sensor.
"0" appears in each of the cooking zone displays and "00"
appears in the timer display. If no further entry is made, the
cooktop will switch itself off after a few seconds for safety
reasons.
^ Touch the display of the desired cooking zone.
"0" will begin to flash.
^ Touch the appropriate number on the numerical keypad.
The power setting selected flashes in the display for a few
seconds to start with and then lights up constantly.
^ Touch the display of the desired cooking zone.
The selected power setting will flash in the display.
^ Touch the appropriate number on the numerical keypad.
If there is only one cooking zone being used, you can set
or adjust the power setting without activating the cooking
zone first.
Operation
25