Giant E-bike User Manual page 9

7. Reinstall the EnergyPak and make sure the slots
are aligned correctly at the bottom.
8. Push the top of the EnergyPak and make sure
the EnergyPak is secured properly. A 'click' can
be noticed while doing so.
9. Pull out the key.
10. The bike is ready for usage.
Integrated downtube EnergyPak inside the bike
1. Connect the charger to the EnergyPak.
2. Connect the charger to an AC outlet.
3. Charging operation can be discontinued at any
given time.
4. Disconnect the charger first from the outlet and
then from the EnergyPak.
5. The bike is ready for usage.
Rear rack EnergyPak outside the bike
1. Insert the key and unlock the EnergyPak, hold
the grip and pull the EnergyPak backwards.
2. Slide out the EnergyPak.
3. Connect the charger to the EnergyPak.
4. Connect the charger to an AC outlet.
5. Charging operation can be discontinued at any
given time.
6. Disconnect the charger first from the outlet and
then from the EnergyPak.
7. Reinstall the EnergyPak and make sure the slots
are aligned correctly in the bottom.
8. Push the EnergyPak forwards and make sure
the EnergyPak is secured properly. A 'click' can
be noticed.
9. Pull out the key.
10. The bike is ready for usage.
7
2
1
8
6