Usage; Storage - Giant E-bike User Manual

3.2.5 Usage

If only 3% of the EnergyPak power is left, the Energy-
Pak will automatically switch assistance to ECO
mode in order to save energy.
If only 1% of the EnergyPak power is left, assistance
will automatically stop. Power assist level indication
bar will blink 3 times. Lights can still be used for
approximately 2 hours.
Power in the EnergyPak can be checked by pushing
the Energy Level check button.
Discharge the EnergyPak completely by riding the
bicycle after 15 normal charges or at least every 3
months totally before charging the EnergyPak again.
This will increase the lifespan of the EnergyPak.
Charge table (200V-240V)
80% charge
100% charge
Charge table (110V)
80% charge
100% charge

3.2.6 Storage

If the bike is not used for a longer period (one month or more) the EnergyPak is best stored:
• At 60% of its capacity (3 out of 5 charging LED's).
• Separate from the bike.
• At temperatures between 0°C and 40°C.
• Checked every month to see if at least one LED is still blinking. Charge when needed.
Charging the EnergyPak should be done at a minimum of every 3 months. Negligence to this could void
the warranty of the EnergyPak.
7
300Wh 8,8Ah
1:45h
3:30h
300Wh 8,8Ah
2:20 h
4:40 h
Charge time in hours
400Wh 11,3Ah
2:00h
4:30h
Charge time in hours
400Wh 11,3Ah
3:00 h
6:00 h
500Wh 13,8Ah
2:45h
5:00h
500Wh 13,8Ah
3:40 h
7:20 h