Table of Contents
Advertisement
Use and Maintenance Manual
Residential Vacuum Units
Scroll through the USER MENU with the UP and DOWN keys until you reach the EMPTY CONTAINER
submenu. Press the SET button and then use the UP and DOWN keys to enter the desired value.
To memorize the new value entered, keep the SET button pressed down for a few seconds until the
MEMORIZED message appears.
To leave this display press the RESET button.
Self-cleaning function:
This procedure is used to modify the parameter that controls the self-cleaning operation, set by default at
90 minutes. Enter the USER MENU by pressing the SET button when the display shows the STANDBY
message.
Scroll through the USER MENU with the UP and DOWN keys until you reach the SELF-CLEANING submenu.
Press the SET button and then use the UP and DOWN keys to enter the desired value.
To memorize the new value entered, keep the SET button pressed down for a few seconds until the
MEMORIZED message appears.
To leave this display press the RESET button.
Continuos operation:
This procedure is used to modify the parameter that controls alarm operation, set by default at 45 minutes.
Enter the USER MENU by pressing the SET button when the display shows the STANDBY message.
Scroll through the USER MENU with the UP and DOWN keys until you reach the CONTINUOUS OPERATION
submenu. Press the SET button and then use the UP and DOWN keys to enter the desired value.
To memorize the new value entered, keep the SET button pressed down for a few seconds until the
MEMORIZED message appears.
To leave this display press the RESET button.
5.7.3. Display of personalized maintenance parameters
With the procedures described here, users can view the most recent maintenance parameters
programmed, with a series of simple operations on the user interface.
Enter the USER MENU by pressing the SET button when the display shows the STANDBY message.
Scroll through the USER MENU with the UP and DOWN keys until you reach the desired submenu. The most
recent value entered will be displayed.
To leave this display press the RESET button until the STANDBY message reappears.
>>> Use of main vacuum unit
29
Advertisement
Table of Contents
