Table of Contents
Advertisement
Use and Maintenance Manual
Residential Vacuum Units
Important:
of the cycle wait at least a minute before opening it
Make annual inspections on the filter to ensure that it is undamaged and to check if it needs
washing (if washed, the filter must be dry before being replaced).
5.6 Reporting User Interface
Centralized Vacuum Cleaner System GDA Series are equipped with a user interface display with blue
background and text scrolling for the management of maintenance and the views of alarms and defects.
(Figure 4)
The thresholds of maintenance are handled by a timer on the time of use.
The following will describe the various reports of the User Interface
5.6.1. Maintenance
Emptying the dust container and *** Press Reset ***
The machine indicates when the dust container must be emptied. Proceed as directed in a Chap. 6.1 of this
Manual.
Once emptied the dust container requires a long press of the reset button to reset the machine in stand-by
mode.
If the vacuum unit indicates to empty the dust container and the same is not particularly full, you can
change the preset time from the factory, increasing it.
Filter Cleaned and ***Press Reset***
The main vacuum unit indicates when is necessary to clean the filter. Proceed as directed in a Chap. 6.2 of
this manual.
Once the filter cleaning requires a long press of the reset button to reset the controller in stand-by mode.
If the main vacuum unit indicates to clean the filter and the same is not particularly dirty, for the next time,
you can change the preset time from the factory, increasing it a little.
Replace with new filter and ***Press Reset***
The main vacuum unit indicates when is necessary to replace the filter exhausted. Proceed as directed in a
Chap. 6.2 of this manual.
Is possible to continue using the main vacuum unit forcing the alarm with a long press of the reset button
to reset the main vacuum unit in stand-by mode.
Self-cleaning filter in progress *** Wait for automatic reset ***
The main vacuum unit equipped with automatic filter cleaning, I carry out regular cleaning.
The auto-filter cleaning cycle takes about 1 minute, after which the unit automatically returns to stand-by.
During the self-cleaning cycle do not open the dust collector container and after the end
>>> Use of main vacuum unit
26
Advertisement
Table of Contents
