Table of Contents
Advertisement
Use and Maintenance Manual
Residential Vacuum Units
>>> Residential Vacuum Units Installation
Figure 8
Figure 9
4.Fit the main vacuum unit, inserting the rectangular projections frontally into the corresponding recesses
in the wall bracket, and applying pressure until they click in. (Figure 10).
5. Connect the system pipe to the main vacuum unit with the sleeve provided, tightening the metal
clamps (clamps and the specific sleeve are both of series). (Figures 11)
6. Connect the main vacuum unit to the air expulsion pipe.
EALLO
Figure 10
Figure 11
20
Advertisement
Table of Contents
