Configure Dcb Policies; Apply Policies To Switch Ports; Save Configuration; Configure Additional Switch - Dell S4048-ON Configuration Manual

3.5

Configure DCB policies

Dell(conf)#dcb-map profile-name
Dell(conf-dcbmap-profile-name*)#priority-group 0 bandwidth 50 pfc off
Dell(conf-dcbmap-profile-name*)#priority-group 1 bandwidth 50 pfc on
Note: The sum of the bandwidth-percentages must be equal to 100.
Dell(conf-dcbmap-profile-name*)#priority-pgid 0 0 0 0 1 0 0 0
Dell(conf-dcb-profile-name*)#exit
3.6

Apply policies to switch ports

Dell(conf)#interface range tengigabitethernet 1/1–1/48
Dell(conf-if-range-te-1/1-48)# dcb-map profile-name
Dell(conf-if-range-te-1/1-48)#exit
Dell(conf)#interface range fortyGigE 1/49 , fortyGigE 1/50
Dell(conf-if-range-fo-1/49,fo-1/50)# dcb-map profile-name
Dell(conf-if-range-fo-1/49,fo-1/50)#exit
Dell(conf)#exit
Note: The sum of the bandwidth-percentages must be equal to 100.
3.7

Save configuration

Dell#copy running-config startup-config
3.8

Configure additional switch

Repeat the commands from section 3 to configure DCB on additional switches.
12 SCG1026 Dell Networking S4048-ON Switch Configuration Guide for PS Series SANs