Advertisement
LSQT1158_EN.book 110 ページ ２００６年１２月２６日 火曜日 午前１０時３０分
Before using
1
Pass the end of the lens cap cord
through the belt.
2
Pass the lens cap through the
loop.
3
To attach or remove the lens cap,
hold both sides of the lens cap
with the tips of your finger and
thumb.
During recording
The removed lens cap can be attached to the
lens cap fixture.
110
LSQT1158
Lens hood
∫ VDR-D310
Rotate the lens hood counter-
clockwise A to remove it.
In order to attach it, place into slot
B, and then rotate it clockwise C.
B
≥ Attach the MC protector or the ND filter of the
Filter Kit (VW-LF37WE; optional) in front of the
lens hood. Do not attach the other accessories
on the hood. (Except for the lens cap)
(Refer to the operating instructions for the
Filter Kit.)
≥ When attaching the tele conversion lens
(VW-LT3714ME; optional) or the wide
conversion lens (VW-LW3707M3E; optional),
first remove the lens hood.
(Refer to the operating instructions for the tele
conversion lens or the wide conversion lens.)
A
C
Advertisement
Chapters
