Advertisement
LSQT1158_EN.book 150 ページ ２００６年１２月２６日 火曜日 午前１０時３０分
Recording
≥ If you press the
button halfway and then
fully, the subject is focused when the button is
pressed halfway. (VDR-D310)
≥ When you press the
focus mode, the subject is focused just before
recording. (VDR-D310)
To stop the timer midway through
Press the MENU button. (The self-timer setting is
cancelled.)
≥ If you turn off the power, the self-timer standby
mode is cancelled.
≥ Depending on the time taken to bring the
subject into focus, the recording may take
longer than set to start.
Recording guideline
function
Checking if the image is level.
(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)
You can check if the image is level while
recording by using the lines displayed on the
screen.
¬ Rotate the mode dial to select
.
Press the MENU button, then select
[BASIC] # [GUIDE LINES] # [ON]
and press the joystick.
To cancel the Recording guideline
function
Press the MENU button, then select [BASIC] #
[GUIDE LINES] # [OFF] and press the joystick.
≥ The guidelines do not appear on the images
actually recorded.
≥ The guidelines are not displayed while rotating
the LCD monitor frontward to record yourself.
150
LSQT1158
button fully in auto
This allows you to record images compatible with
wide-screen TVs (16:9) and regular TVs (4:3).
∫ Recording images with a 16:9
¬ Rotate the mode dial to select
Press the MENU button, then select
[BASIC] > [REC ASPECT] > [16:9]
and press the joystick.
∫ Recording images with a 4:3
or
¬ Rotate the mode dial to select
Press the MENU button, then select
[BASIC] > [REC ASPECT] > [4:3]
and press the joystick.
≥ The default setting is [16:9].
MENU
Reduces the image shaking due to hand
movement when recording.
¬ Rotate the mode dial to select
Wide mode
This is for selecting the screen's
aspect ratio when recording motion
pictures.
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
aspect ratio
aspect ratio
Image stabilizer function
This is for reducing image shakes
during recording.
(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)
.
.
MENU
.
or
Advertisement
Chapters
