Operation - Bosch MUC2...RU Instruction Manual

Hide thumbs Also See for MUC2...RU:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1

Operation

Function selection mode
In function selection mode, all preparation
programmes are selected and all settings
are made on the appliance. To do this,
perform the following steps:
W Risk of scalding!
During operation, the appliance must never
be used without the pan and the steam
outlet inserted.
Caution!
Each time prior to operation, check the
appliance for damage, completeness,
cleanliness and proper installation.
X "Before using for the first time" see 
page 7
1. The appliance is ready to use. Press
button B in order to access function
selection mode.
In function selection mode, button B and
the indicator [ мой режим ] (my mode) are
permanently lit. Button G flashes. "00:00"
is shown in the display.
Note: If no input is made on the control
panel within 5 minutes, the appliance
automatically switches to standby mode.
Selecting and starting a
preparation programme
There are 16 pre-configured preparation
programmes available to choose from.
X "List of preparation programmes" see 
page 17
1. Fill the appliance with the desired
ingredients. To do this, open the lid and
pour the ingredients into the pan. The
measuring scale on the inside of the pan
can also be used to read the quantity.
MUC2_MUC4_RU.indb 9
Caution!
■ Do not fill the pan beyond the mark
[4.0 litres]!
■ Use only the spatula provided for stirring
(do not use metal cutlery).
2. Close the lid and press button B to
access function selection mode.
Note: Certain preparation programmes
or steps are carried out with the lid open.
X See recipe book provided
3. Keep pressing button D until the
desired preparation programme is
selected.
The corresponding LED lights up in the
control panel and the pre-configured
preparation time for the selected
preparation programme flashes.
4. Press button G to start the preparation
programme.
The appliance heats up the pan until the
target temperature is reached. During
the heating phase, lines that light up in a
clockwise direction appear in the display.
Once the target temperature is reached,
the lines go out and the preparation time is
shown in the display.
The preparation process starts
automatically.
Operation
en
9
07.03.2016 10:01:58

Advertisement

Table of Contents
loading

This manual is also suitable for:

Muc4...ru

Table of Contents