Chapter 1 Overview Of Nvr; Front Panel; Nvr Front Panel（For Reference Only - TECHVIEW QV-3012 User Manual

Chapter

Chapter 1 Overview of NVR

1.1Front Panel

P.S：NVR is short for Network Video Recorder. NVR is short for Network Video Recorder.
NVR Front Panel（ （ （ （ For reference only
Key title
Item
or Indicator
1
Power Indicator
2 IR Receiver
3 HDD Indicator
Channel
select:
4
CH1 CH2
CH3 CH4
5 QUAD
6 REC
7 MENU/ESC
8 Down Key
9 SEL/EDIT
10 Up Key
11 PTZ
12 REW
13 PAUSE
14 PLAY
15 FWD
16 STOP
17 USB
Overview of NVR
For reference only） ） ） ）
Remark
PWR
If the "Green" indicator is on, NVR is getting power
Receive IR signal from Remote Controller.
If the "Red" indicator flashes, the hard drive is being read or written to.
HDD
indicator is always on, it means the hard disk is abnormal, unformatted or indicator is always on, it means the hard disk is abnormal, unformatted or
has no recording files.
Select a channel
On Live or Playback mode, switch to Quad display. On Live or Playback mode, switch to Quad display.
●
Press the button to start manual record.
Enter into Main menu, exit or stop playing
Move down
Enter into shortcut menu and select ENTER and EDIT Enter into shortcut menu and select ENTER and EDIT
Move up
PTZ
Enter into PTZ control interface
Move to left; Rewind function;
decrease PTZ rotation speed and parameter value of graphic setting decrease PTZ rotation speed and parameter value of graphic setting
Pause / play frame by frame manually
Enter into Record Search menu and play.
Right key; increase PTZ rotation speed and Parameter value. Right key; increase PTZ rotation speed and Parameter value.
Stop playing or stop manual record
USB port
Table 1-1
Function & Description Function & Description
the hard drive is being read or written to. If the
1
用户手册 用户手册 用户手册 用户手册
is getting power normally.