Table of Contents
Advertisement
4.2.1.3.3DDNS
Go to"Main Menu"→"Parameter
User may set DDNS in any one of the above network connection after applying dynamic
NS in any one of the above network connection after applying dynamic
NS in any one of the above network connection after applying dynamic
domain service. User may remotely access NVR through domain by using browser in the
domain service. User may remotely access NVR through domain by using browser in the
domain service. User may remotely access NVR through domain by using browser in the
form of http://applied domain: mapped Web port number. When using DDNS dom
name to access NVR, user shall confirm that the port can be normally connected to
name to access NVR, user shall confirm that the port can be normally connected to
name to access NVR, user shall confirm that the port can be normally connected to
current IP on the public network and the settings for server
current IP on the public netw
name/user/password/setting
name/user/password/setting should be consistent with NVR local setting
4-15.
4.2.1Alarm
Go to "Main Menu"→"Parameter "→ "Alarm" → "Motion" to enter into the interface shown
Go to "Main Menu"→"Parameter "→ "Alarm" → "Motion" to enter into the interface shown
Go to "Main Menu"→"Parameter "→ "Alarm" → "Motion" to enter into the interface shown
as picture 4-16-1.
Picture 4-16-1
4.
2.1.1 Motion
Picture 4-16-2
Parameter"→"Network"→"DDNS"to enter into the menu interface.
domain: mapped Web port number. When using DDNS domain
domain: mapped Web port number. When using DDNS dom
ork and the settings for server address/host
should be consistent with NVR local setting. See Picture
Picture 4-15
Channel:Enable or disable Motion function.
Enable or disable Motion function.
Sensitivity:Support 1-8 level, 8 is the highest level.
Buzzer:When detecting object moving, buzzer
When detecting object moving, buzzer
makes alarms (disable, 10 seconds, 20 seconds, 40
makes alarms (disable, 10 seconds, 20 seconds, 40
seconds and 60 seconds).
Alarm Out:Connect to the alarm switch of the alarm
Connect to the alarm switch of the alarm
apparatus.
Show Message: Messages will be displayed on the
screen when moving object is detected and alarms
screen when moving object is detected and alarms
are made.
Send Email:When moving object is detected, send
When moving object is detected, send
Email to the specified Email address.
Email to the specified Email
Full Screen:When moving object is detected,
When moving object is detected,
messages will be displayed in full screen.
messages will be displayed in full screen.
Latch Time:When moving object is detected, the
When moving object is detected, the
alarm time can be set as 10 seconds, 20 seconds,
alarm time can be set as 10 seconds, 20 seconds,
40 seconds and 60 seconds.
40 seconds and 60 seconds.
Post Recording:After the alarm finish
duration time of the alarm recording can be set as
duration time of the alarm recording can be set as
30 seconds, 1 minute, 2 minutes and 5 minutes.
30 seconds, 1 minute, 2 minutes and 5 minutes.
12
USER MANUAL
USER MANUAL
menu interface.
8 level, 8 is the highest level.
seconds).
Messages will be displayed on the
After the alarm finishes, the
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the QV-3012 and is the answer not in the manual?