Valor 1430FFK Installation Instructions Manual page 3

Installation at time of framing
1. On the top of the appliance's case in front of the
stand-off s, remove the positioning brackets (2
screws each); they are not used with this kit.
2. On the sides of the appliance case, install the side
stand-off s (2 screws each).
3. Fit the upper panel support to the top of the
appliance's case as indicated (5 screws).
4. Install the lower panel using the three studs at the
base of the appliance (3 nuts).
5. On the appliance, install the side panels as
indicated (3 screws per side).
6. Install the upper panel as indicated (3 screws).
3