Service Menu - Salus ST625TX Instruction Manual

If the ST625TX is able to receive an RCC signal, the time will be correctly updated regardless of the
DST setting, but if no RCC signal is being received and DST is ON, then the current stored time will be
automatically adjusted.

SERVICE MENU

The Service Menu should only be selected or changed by the Engineer carrying out the installation, or
other qualified person. It is strongly recommended that you familiarise yourself with the instructions
contained in the Operation section of this manual before attempting to change any of the settings in
the SERVICE menu. During commissioning the installation engineer has the option to enter either his
Mobile or Office telephone number as both a reminder when the system is due to be serviced, and as
a way for the home owner to make contact when the service is due.
The Arrow key is not active when the ST625TX is in NORMAL mode. To access the Menu
screens, press the OK key once. The first menu displayed is the PROGRAMME menu:
Your ST625TX can be configured for HEAT or COOL applications. This allows the product
to control the Heating or Cooling systems. The factory default setting is HEAT, details
on how to change the default setting for a cooling application can be found below.
NOTE: Changing the HEAT or COOL function should only be changed by your
engineer or a competent person, changing this setting will have a serious effect
on your system operation.
Use the Touch Ring to scroll through the menu screens, once SERVICE appears in the
display press the OK button to enter the SERVICE menu. The SERVICE indicator will be
displayed on all SERVICE menu screens.
Firstly you need to enter a unique PIN code, when the first
digit flashes scroll to set the first digit and press OK to
confirm the repeat for the other two digits Once all digits
have been entered, press OK to confirm or the arrow key
to return to previous digit or previous display. The service
code is total 3 digits, from 000 to 999.
ST625TX INSTRUCTION MANUAL 25