Setting The Temperature; Cf-18 Cf - Waeco CF-1 Instruction Manual

_CF-18_60.book Seite 39 Mittwoch, 17. Januar 2007 3:26 15
CF-18
CF-18: Slide the sliding switch (Fig. 3 4, page 3) to HIGH if
you wish to operate from a starter battery or to "LOW" if you
want to operate from a supply battery.
The "POWER" LED is lit green.
The cooler starts cooling the interior.
When the cooling temperature has been reached, the "POWER"
LED is yellow lit.
CF-25, CF-35, CF-40, CF-50, CF-60
Press the "ON/OFF" button (Fig. 4 1, page 4) for between one
and two seconds.
The "POWER" LED lights up.
The display (Fig. 4 5, page 4) switches on and shows the
current cooling temperature.
Note
I
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
The cooler starts cooling the interior.
Locking the cooler
Close the lid.
Press the lock (Fig. 2 1, page 3) down, until it latches in
place audibly.
6.6

Setting the temperature

CF-18
Set the cooling temperature with the temperature controller
(Fig. 3 1, page 3).
Operation
39