Selecting The Temperature - Waeco CoolMatic CD30 Installation And Operating Manual

Operation
7.3

Selecting the temperature

The switch on the thermostat (see fig. 2 2, page 3) displays the selected
temperature.
Switch position
MAX
MIN
➤ If you wish to set the temperature to cooling, turn the thermostat knob
(see fig. 2 2, page 3), to the desired temperature range.
7.4 Switching off the coolbox
I
NOTE
If you wish to leave the cooling device switched off for a longer pe-
riod, clean it and leave the drawer slightly open. This will prevent
unpleasant odours from forming.
➤ Open the coolbox drawer.
➤ To switch off the coolbox, turn the thermostat knob (see fig. 2 2, page 3)
to the "0" position.
✓ The coolbox is switched off.
➤ If you wish to stop using the coolbox, disconnect the connecting cable
from the battery.
24
Temperature range
(independent of ambient temperature)
approx. –2 °C in interior
approx. +12 °C in interior
CD30
EN