Access To Terminal Blocks Eats30N - Eats30H; Hardwired Input/Output Connection (Eu) Eats30N - Eats30H; Input/Output Connection (Us) Eats30P - Eaton EATS30N Installation And User Manual

4. Power cables connection
4.2

Access to terminal blocks EATS30N - EATS30H

4.3

Hardwired Input/Output connection (EU) EATS30N - EATS30H

To UPS 1
Cable cross sections
Terminal Wire
position function
L1 / L2 Phase
N1 / N2 Neutral
Ground
4.4

Input/Output connection (US) EATS30P

Page 8
To UPS 2 To load
Terminal wire
size rating
32A
1. Connect input power cables to two
UPSs (UPS1 (S1) is the preferred
source).
2. Connect output power cable to
load.
Minimum input Tightening
wire size torque
10 AWG 14Kgf-cm
To load
To UPS 2
To UPS 1
ATS-01_EN