Console Management - Eaton EATS30N Installation And User Manual

8. SNMP IPv6 for ATS
8.4

Console Management

You can manage the SNMP IPv6 through the "LOCAL" port. Please use an RJ45 to DB9 cable to connect the
SNMP IPv6's "LOCAL" port and your workstation's COM port. Make sure both of the DIP switches are set to
the OFF position (normal mode). The baud-rate of the workstation's COM setting should be 2400 bps.
Web Card Main Menu
TCP / IP Setting
Page 2
User Manager
Network Parameter
IPv6 for ATS-00_EN